When adjusting brightness on an Apple display (iMac, MacBook, or Apple displays), you may need to open System Preferences > Displays to fine tune the brightness to more closely match the target. If your prints are darker than your display, feel free to try a lower display luminance setting of 100, 90, or even 80. We would recommend using the Advanced method and select the bottom option to set luminance to a specific level and then select “120”. The default gamma (aka tone response) is set at 2.2 in ColorMunki’s Preference menu found in “File” > “Preferences” from the home screen. The photographers and graphic designers of the world have determined that a monitor profiled to these parameters will most closely match a print that is viewed in a 5000K light booth (Graphic arts standard). The recommended display profiling settings of a D65 white point, 2.2 gamma, and 120cd/m2 has been set by the industry experts. When saving the profile, use the default unique name (includes a year/date.time stamp before the “.icc”).Uncheck both of the “Advanced Options” (Ambient Light Smart Control and Flare Correct) and click “Next”.If you have been using other target settings or your print lab recommends other settings, feel free to use them. When profiling, select the “Advanced” method and use D65 for the white point target and select the bottom radio button to choose a target luminance of 120 cd/m2.Click “OK” to save these settings and close the “Preferences” window. If this is the new 4K 21.5" or 5K 27" Retina iMac manufactured in Late 2015 or later, select "GB-LED (RG Phosphor)" for the Technology Type. Select “White LED” for your Technology Type if it is an Apple display manufactured after 2009. Uncheck “Achieve display luminance value using video LUTs” and uncheck “Enable ADC”.Go to “ColorMunki Display” in the menu bar and click on “Preferences”. Open ColorMunki Display with the Munki connected.Follow these instructions to turn these functions off: Turn off “ADC” and do not use the video LUTs to adjust brightness by opening the ColorMunki Display “Preferences” window with the ColorMunki plugged in. Profile your display using this workflow: Connect the CM Display and open the ColorMunki Display software application.The onscreen color should change and will likely look bad. Click on the profile named “DisplayProfile_Linear.icc” to reset your display’s RGB channels to a linear fashion. Uncheck the "Show profiles for this display only" check box. Open “Displays” in System Preferences and select the “Color” tab.Navigate to Contents > MacOS > Profiles and then copy and paste the “XRite_LinearProfile.icc” profile to the Mac HD\Library\ColorSync\Profiles folder.Now go to the Applications folder and right-click (or control-click) on the ColorMunki Display icon and click on “Show Package Contents”.Make sure that the “Display contrast” slider is set all the way to the left at “Normal”. Go to System Preferences > Accessibility and select the “Display” option on the left.Go to the Apple icon in the menu bar > System Preferences > Accessibility.Next, please do the following in exactly this order: If profiling with a laptop, the laptop's power supply MUST be plugged in while profiling.Consider turning off all anti-virus and/or firewall software when profiling.An instrument that is not flush on the screen’s surface will result in bad measurement data and then poor results when using the profile. PLACE THE MEASUREMENT DEVICE FLUSH ON THE SCREEN WHEN PROFILING! This will more easily be accomplished tipping the display back and carefully place the device on the screen while viewing from the side.Some laptop computers will require a powered USB hub to deliver the necessary power. An acceptable extension is the use of a powered USB hub.Also avoid unpowered USB hubs as well as USB extensions. Avoid using USB ports on keyboards and monitors.Typically, a tower will have rear ports that more reliably and consistently deliver the required power to the device. Connect the measurement device to a properly powered USB port.If a display profile produces poor results (color cast, low contrast, high contrast, oversaturated, undersaturated, low luminance, etc.), try reprofiling after making sure to check the following: Poor Results With ColorMunki Display On MacĬustomers can sometimes experience poor results, unexpected results, color cast, or bad results with a ColorMunki Display profile on Mac Out of Production Products - Find Your Upgrade.
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |